Tools : ISD, ISA Documentation
| Development Kit Quick Start Guide | This document is a step-by-step guide that covers hardware and software installation procedures required to set up an EM250 or EM260 Development Kit with factory default settings. The Ember InSight Desktop provides an easy-to-use and effective way to analyze network traffic on an Ember system. Revision E (the two files are the same). Attachment: Attachment: |
| ISA3 Technical Specification | The Ember InSight Adapter 3 is the hardware interface between the Ember EM35x-based designs and the Ember InSight Desktop. This document describes InSight Adapter features and specifications. Revision C. Attachment: |
| Training Video Series | |
| EM260 Development Kit User Guide | This document describes the EM260 Development Kit and explains how to set up its hardware and use the Ember InSight Adapter. Document 4027. Revision D. Attachment: |
| InSight Adapter Technical Specification | The Ember InSight Adapter is the hardware interface between the Ember EM2xx-based designs and the Ember InSight Desktop. This document describes InSight Adapter features and specifications. Revision G. Attachment: |
| EM250 Development Kit User Guide | This document describes EM250 Development Kit and explains how to set up its hardware and use the Ember InSight Adapter. Revision D. Attachment: |
| Troubleshooting InSight Desktop | If your EM250 device fails to start capturing and Here are some things to try in troubleshooting your EM250 sniffer: |
| Using the EM260 Dev Kit board as a sniffer |
I want to use my EM260, in conjunction with the breakout board and Insight adapter, as a sniffer to watch traffic in my network.
This How-To assumes that you have already connected the EM260 RCM to the Breakout Board, hooked up the Insight adapter, and have verified you can connect from Insight Desktop. In Insight Desktop, click on the "+" sign next to the node you wish to use as a sniffer. |
| How to enable PTI (PacketTrace Interface) on EM250 | PacketTrace Interface [PTI] is a built-in mechanism on the EM2xx chipset that allows it to report incoming/outgoing packet events from the baseband radio to an InSight Adapter for display/capture in InSight Desktop. This article explains how to enable the PTI feature in an EM250 application. Because PTI is managed at the chip level, the proper pins must be enabled to use this feature. Pin management is done via the BOARD_HEADER file; the default BOARD_HEADER for the Ember EM250 Breakout Board, located in |
