EM250

Introductory module for Ember training curriculum.

Explains and contrasts the Ember chip platforms that are offered, then explains what support resources are available for developers/designers seeking product information/support.

NOTE: If you are having trouble viewing this video in your browser, check that you have the Adobe Flash player installed and that your browser settings allow playing embedded video content.

This document describes the different options for integrating RF testing and characterization into standard test flows. This application note is intended for Ember customers who are moving from the early prototype development stage to the manufacturing production environment and need assistance with manufacturing test. The specific target audience is test engineers developing test processes for their Ember-enabled products. Revision F.

Attachment: 

120-5016-000_AppNote_MfgTestGuidelines.pdf

This document describes how the EmberZNet stack can be used to create an application. It provides a basic introduction to ZigBee, EmberZNet’s components and capabilities, and a walk through of applications provided by Ember. Revision D.

Attachment: 

120-4028-000_EmberZNetAppDevGuide.pdf

This document provides a comprehensive reference to EmberZNet stack. To understand the basics concepts of EmberZNet and Zigbee, please read the EmberZNet Application Developer's Guide. Revision E.

Attachment: 

120-3021-000_App_Dev_Ref_Manual.pdf

This document describes the EmberZNet Serial Protocol (EZSP), which is a communication protocol between a Host Processor and a EmberZNet Network Processor (i.e. EM260 or EM250 running EZSP mode). EZSP messages are sent between the Host and the Network Processor over either a SPI or a UART interface. Revision J.

Attachment: 

120-3009-000_EZSPReferenceGuide.pdf

This document is a step-by-step guide that covers hardware and software installation procedures required to set up an EM250 or EM260 Development Kit with factory default settings. The Ember InSight Desktop provides an easy-to-use and effective way to analyze network traffic on an Ember system. Revision E (the two files are the same).

Attachment: 

120-4023-000_QuickStartGuide_EM260.pdf

Attachment: 

120-4023-000_QuickStartGuide_EM250.pdf

This Application Note is intended to accompany the reference designs and provide detailed information of each design. This document is intended to be read by the hardware and test design engineers who are designing the EM250-based PCBs. After reading this document, engineers should be able to successfully implement a design involving the EM250. Revision H.

Attachment: 

120-5026-000_Designing_with_an_EM250.pdf